Includes stainless steel (ss) 3-way valve at sea strainer, 10 feet webbed suction tubing, boost pump, clear pre-filter housing with mounting bracket, wrench, 5 micron filter element, Commercial high pressure pump with 12 volt clutch, with over pressure relief valve, 6 feet 3000 PSI SS high pressure line, one 2.5″ diameter by 40″ Dow R O membrane with padded mounting brackets, 0 to 60 GPH flow meter, 3-way product water valve. ss liquid filled high pressure gauge (0 to 1500 PSI), with ss needle/pressure control valve, 3-way brine/pickle valve, 20 feet 3/8″ food grade tubing, through installation, maintenance, and operation manual, pickling chemicals, and all required high and low pressure fittings-A COMPLETE SYSTEM. The components are all labeled and numbered with a system diagram showing how all are connected. Starting with #1 ss 3-way sea water valve in to #2 boost pump, to #3 pre-filter; very easy to follow instructions and if a question comes up you can email or call for assistance.

You will need to supply thru-hulls, sea strainer,  hose clamps, and wiring for pumps. You will need to fabricate a mounting plate on engine or hull to mount the pump.

$2,975.00 and $150.00 for shipping FedEx or UPS.

Options: Fresh water flush kit $190.00